The RE-1 black and white camera system will add video surveillance to the top quality RE-1 telephone entry system. This camera is continuously powered by the RE-1. The camera’s infrared light emitters illuminate the area directly in front of the entry system for nighttime or low light operation.
Linear’s Model RE-BWC1 (P/N ACP00886A) CCTV camera can be installed inside
the RE-1 Entry System. The camera provides a video signal for viewing the area in
front of the entry system
The camera is continuously powered by the RE-1. The camera’s infrared light emitters
illuminate the area directly on front of the entry system for nighttime or low light
operation.
The camera focus has been factory adjusted to a range of three to four feet.
The RE -1 CAMERA jack is used to connect the camera to the main circuit board with
the single-ended modular cable supplied with the camera. This cable routes power to,
and video from the camera.
The RE-1 VIDEO jack is for connection to a video cable with a Type "BNC" connector. Up
to 300 feet of 75-ohm RG-59 video cable can be used. Longer cable runs may require the
use of a video amplifier.
|